LAUNCH CRT5011E Newest TPMS Relearn Tool with 4pcs Launch LTR-03 RF TPMS Sensor Support 315/ 433MHz for Read/Activate/Programming/Relearn/Reset

Description

LAUNCH CRT5011E Newest TPMS Relearn Tool with 4pcs Launch LTR-03 RF TPMS Sensor Support 315/ 433MHz for Read/Activate/Programming/Relearn/Reset

Launch CRT5011E tire pressure sensor reset tool code reader & diagnostic tool is specially developed by LAUNCH, which enables users to trigger TPMS sensor, program TPMS sensor, perform the relearning procedure and check sensor part number. Additionally, it also supports all 10 modes as OBD2 scanner for a complete diagnosis.

With built-in help menus and code definitions, diagnosing and repairing that dreaded Check Warning Light is now easier than ever!

Launch CRT5011E TPMS Tool Highlights:

• LAUNCH CRT5011E is a powerful and versatile tpms & obdii 2-in-1 tool.
• Launch CRT5011E can program the sensor by receiving multi-frequency 315MHz/433MHz. Only support LAUNCH Sensor.
• LAUNCH CRT5011E TPMS Relearn Tool can easily activate most of the known OEM TPMS sensors.
• Free Lifetime Upgraded, You can update your CRT5011E from your PC at any time without any cost
• Besides writing the Sensor ID into ECU, it can read sensor ECU ID from TPMS. CRT5011E also supports the diagnosis of 99% of the models on the market.
• CRT5011E tpms tool supports 10 languages: English, French, Russian, German, Italian, Japanese, Korean, Spanish, Portuguese, Chinese. You can configure the system language of the tool to your preference language.

Launch CRT5011E TPMS programming tool functions:

1. TPMS:

Activate and match with all 315 MHz / 433 MHz tire pressure sensors
Reset, relearn* and reprogram tire pressure sensors fast.
(“relearn” is write new sensor ID to the vehicle’s ECU, but Some models need to work with the X431 tablet series in order to be written to. Such as PRO ELITE or CRP 919X BT.)
Diagnose the tire pressure issues and turn off the warning light by relearning and programming your new tire pressure sensor.
Reprogramming LAUNCH LTR01/LTR03 sensors, Please choose LAUNCH LTR03 sensors here
Read tire pressure, tire temperature and battery status accurately
Reprogram up to 8 sensors at one time
Provide TPMS relearning procedures and sensor OE number lookup
Multiple ID generation methods: Automatic creation/Manual creation/Copy ID by Activation/Copy by OBD/Creat Multi-sensor (1-8)

2. Full OBD diagnosis:

Read dynamic data streams and MIL/Read readiness status/Freeze frame data/Read DTCs/Clear DTCs/O2 sensor test/On-board monitor test/Read vehicle information, etc.

Please connect the OBD2 port and start the engine before use.
Note: For indirect TPMS vehicles, only the Relearning function is supported. For vehicles using Direct TPMS, it generally includes Activation, Programming and Relearning. The available TPMS functions may vary for different vehicles being serviced.

Why do you need Launch CRT5011E obd2 scanner with tpms relearn?

Tire Pressure Monitoring helps drivers to properly maintain their vehicle tires, improves vehicle safety and fuel efficiency. 33,000 crashes are a result of under-inflated tires. 75% of roadside flats are caused by a slow leak or under inflation. 35% of drivers admit to never checking tire pressure. NHTSA estimates TPMS could save as many as 660 lives annually. What will you do when you notice the illuminated TPMS warning light？

✘ – Ignoring the warning light will cause you are risking tire failure or even serious injury.

✘ – Going to the workshops for a comprehensive check is effective, but it will cost more than your budget.

✔ – LAUNCH CRT5011E costs little of the money to check TPMS in a workshop and it can perform the same professional functions as well.

5 Modes to Program Launch LTR01 Sensors and Other Unencrypted Sensors

The Launch CRT5011E TPMS sensor programmer tool can program all Launch LTR01 sensors and Other Unencrypted Sensors, including 315MHz and 433MHz, to replace damaged sensors.
CRT5011E has 5 modes to program Launch LTR01 Sensors and Other Unencrypted Sensors:

• Auto Create: This function is designed to program the LAUNCH-sensor by applying random IDs created according to the test vehicle when it is unable to obtain the original sensor ID. Select the wheel which needs to be programmed on the tool, place a LAUNCH-sensor close to the TPMS antenna of the tool, and select CREATE SENSOR to create a new random sensor ID.
• Manual Create: This function allows users to manually enter sensor ID. Users can enter the random ID or the original sensor ID, if it is available.
• Copy ID by activation: It can get tire pressure sensor ID when the tire sensor is working normally, you can write in the retrieved original sensor data to the LAUNCH-sensor. It is used after the original sensor is triggered.
• Copy by OBD: Firstly, you need to perform a Read ID from Vehicle in the Relearn function, which reads the sensor ID from the vehicle ECU. It can be used if the sensor is damaged and the original ID is saved in the vehicle system. You can use it to get the old sensor ID stored in ECU, and write it directly into your LAUNCH RF-sensor.
• Creat Multi-sensor 1-8: This function allows users to program multiple sensors simultaneously. Up to 8 sensors can be programmed at the same time.

Launch CRT5011E TPMS Tool can activate 315/433 MHz Sensors

TPMS Sensor Activate:

Launch CRT5011E TPMS Diagnostic Tool allows users to activate TPMS sensor to view sensor data such as sensor ID, tire pressure, tire frequency, tire temperature, battery condition(voltage).

TPMS Relearn:

Stationary Relearn: Require the vehicle to be placed in the “Learn Mode”, follow the screen instruction to activate sensors, and perform stationary relearn.
OBDII Relearn: Allow the CRT5011E to directly write TPMS sensor IDs to the TPMS module via the OBD connector.
Auto Relearn: You can complete relearning by driving and refer to the on-screen Relearn Procedure for the exact details of the process.
Due to different car models, OBDII Relearn, Stationary Relearn, and Auto Relearn may not exist at the same time. Some models have all 3 relearn methods, but some models may only have one or two relearn methods.

!!! Attention >>>>>>>

1. LAUNCH CRT5011E TPMS Relearn Tool is specially designed to diagnose electronic control systems of 12V vehicles. Please note that it is NOT suitable for a six-wheeled dual-rear car.
2. For early magnet-activated sensors, place the magnet over the stem and then place the tool alongside the valve stem.
3. If the TPMS sensor requires tire deflation (of the order of 10PSI), then deflate the tire and place the tool alongside the stem while pressing the button.

!!! If you want to activate/check/read the tire pressure sensor, please point the CRT5011E TPMS Tool within 30cm of the sensor.

!!! To activate/check/read the tire pressure sensor, please ensure that you have selected the correct car model, year and frequency of tpms sensor.

!!! If you cannot activate/check/read the tire pressure sensor, please try other car years and frequencies.

!!! If you still can’t activate/check/read the tire pressure sensor, please try deflating the tires while activating it(Some models require).

!!! If it still fails to activate/check/read the sensor, PLEASE FEEDBACK Your Car Model, Year and Sensor OEM Part Number to us(sales@x431tool.com). 

More information for Launch CRT5011E TPMS code reader & diagnostic tool please check here >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>

4pcs Original Launch LTR-03 RF Sensor 315MHz & 433MHz 2 in 1 Programmable TPMS Sensor (Metal Valves/Rubber Valves)

Notes:

1. 2 in 1 Programmable TPMS Sensor
2. Battery Life of 4 to 6 Years
3. Over-the-Air Wireless Programming
4. With 2 Version: Metal Valves/ Rubber Valves
5. Compatible with OE Sensors of 315MHz/ 433MHz
6. Unlimited Number of Reprogramming for LAUNCH Sensors

Description:

Features with an international leading automotive grade chip, the pressure value of LTR-01 can be accurate to 0.1 BAR.  The high Precision Air Valve can effectively prevent air leakage and ensures durability and stability. With the outstanding and reliable OE level performance, LTR-01 can replace all originalreplace original tire pressure sensors, copy the original tire pressure sensor data and can be programmed indefinitely.

Launch Radio frequency Rubber TPMS Sensor is a programable universal replacement Tpms sensor which meets original equipment qualityand performance standards.The TPMS Sensor covers over 95% of equipped vehicles and has a 3 to 5 year battery life. , its combines 315 to 433 MHz applications into one sensor

Features:

1. Dual frequency in one sensor, covers 98% vehicle models
2. It can replace all original tire pressure sensors and copy the original tire pressure sensor data
3. Performance comparable to the original factory (support 315MHz, 433MHz), unlimited programming,  convenient and durable non-destructive installation
4. Features with an international leading FXTH87 automotive grade chip, pressure value can be accurate to 0.1 BAR
5. The high Precision Air Valve effectively prevents air leakage and ensures durability and stability

How to Use the Launch LTR-03 RF Sensor?

1. Tire pressure learning:
Use the tire pressure learning function of a tire pressure diagnostic tool, follow the steps to operate. (Part of the vehicle learning process is self-learning, the tire pressure sensor will automatically activate after a short distance driving

2. Install the Tire:
Put the tire with the installed tire pressure sensor back on the vehicle

3. After the vehicle self-learning, the tire pressure sensor system is activated successfully, and the dashboard will show the normal tire pressure.

Specification:

Operating frequency	315MHz/ 433MHz
Battery voltage	3.0V
RF transmitter power	5~8dBm
Storage Temperature	-40°C~125°C
Working Temperature	-40°C~125°C
IP Rating	IP67

Package List:

1pc x LAUNCH CRT5011E host
1pc x card reader
1pc x charger
1pc x USB cable
1pc x main cable
1pc x black bag
1pc x EU-standard adapter
1pc x US-standard adapter
4pcs x Launch LTR-03 RF Sensor